- Piirilevytarvikkeet
- Laitekotelot
- Liittimet ja kannat
- Robotiikka ja protoilu
- Kytkimet ja osoittimet
- Rakennussarjat elektroniikan rakenteluun
- Teholähteet ja laturit
- Pientarvikkeet
- Starttipaketit
- Kaiuttimet, -rakennussarjat & tarvikkeet
- Kaapelit
- Paristot, paristopitimet ja akut
- OUTLET
- Lahjakortit
- Uutuudet
- Outlet
VISATON DL 18/2 T 8 OHM



- Tuotekoodi: DL182T-8OHM
- Takuu: 3 vuotta
- Paino: 1.38 kg
- Tilattavissa yli 50 kplTuotteet lähetetään 1-2 arkipäivässä niiden saavuttua.
- Toimituskulut alkaen 7,90 €Nouto myymälästä0,00 €
17 cm (6.5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A push-terminal block allows a quick and easy connection. A quick-mounting bayonet connection provides an easy installation of the grille.
DL 18/2 T can be supplied painted in other RAL colours on request.
Speaker cabinet systems for concrete ceilings are available from KAISER, 58579 Schalksmühle, Germany. The KompaX cabinet series is suitable for our ceiling speakers. Some additional front parts maybe necessary (front rings, mineral fibreboard etc.). More details are available on the Homepage of KAISER (Housing for lamps and loudspeakers). In order to get more detailed information, press the "Technical information" button of the particular product. Fire protection housing systems (F30) are also available (FlamoX).
Typical applications:
- For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc.
Attributes:
- Moisturised cone
- UV-resistant
- Metal basket, non-corrodible
- functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
| Technical Data: | |
|---|---|
| Rated power | 50 W |
| Maximum power | 70 W |
| Nominal impedance Z | 8 Ohm |
| Frequency response | 50–20000 Hz |
| Mean sound pressure level | 90 dB (1 W/1 m) |
| Opening angle (-6 dB) | 64°/4000 Hz |
| Resonance frequency fs | 90 Hz |
| Magnetic induction | 0,95 T |
| Magnetic flux | 310 µWb |
| Height of front pole-plate | 4 mm |
| Voice coil diameter | 25 mm |
| Cutout diameter | 200 mm |
| Net weight | 1,15 kg |
| D.C. resistance Rdc | 6,9 Ohm |
| Mechanical Q factor Qms | 2,68 |
| Electrical Q factor Qes | 1,68 |
| Total Q factor Qts | 1,03 |
| Equivalent volume Vas | 15 l |
| Effective piston area Sd | 129 cm² |
| Dynamically moved mass Mms | 7,9 g |
| Inductance of the voice coil L | 0,75 mH |
| Protective system | IP X3 |
| Temperature range | −40 ... 80 °C |
