RGB PISTEMATRIISIKORTTI & OHJAINKORTTI ATMEGA328 POHJAINEN

This Arduino based (ATmega328P) RGB LED matrix driver platform based gains three 8+6-bit channels of hardware PWM control thanks to its LED driver. Its design allows you to easily change or write firmware using the Arduino IDE.

Ominaisuudet

8 bits colours support with 6 bits correction for each colour in every dots

hardware 16 MHz PWM support

without any external circuits, play and shine

dedicated GPIO and ADC interface

hardware UART and IIC communication with easy cascading

24 constant current channels of 100 mA each

8 super source driver channels of 500 mA each

driver board is based on ATMEGA328 and works with IDE

Tekniset tiedot

module dimensions: 60 x 60 x 16 mm

microprocessor: Atmega328P

indicator: PWR state

power supply: 5 to 7.5 VDC

cascade power connector: terminal blocks

program interface: UART/ISP (VMA440)

expansion socket: 100 mil bended pin header pair

communication protocols: UART/IIC

current consumption (except LED matrix): max. 40 mA

drive current (every channel): max. 500 mA

drive current ( every dot): max. 58 mA

circuit response time: 10 ns

RGB LED matrix colour resolution per dot: 16 M

UART baud rate: 9600 - 115200