VISATON KAIUTINRAKENNUSSARJA VOX 253 MTI (pari)

The VOX 253 MTI is the current highlight in the VOX series. The uncompromising approach, involving fitting the TI 100 8 Ohm as the low- to mid-range unit and the MHT 12 8 Ohm as the tweeter, worked highly successfully in the TOPAS. Following the basic design concept of the VOX series, this system is fitted with two TI 100 8 Ohm 's as low- to mid-range units and the TIW 250 XS 8 Ohm as the woofer.

One particularly convenient innovation is used for the first time in the VOX 253 MTI: it is now possible to tune the bass output level on the crossover unit. Depending on the acoustic properties of the room and personal preference, the bass output might be too strong, if the speakers are placed close to a wall, for example. The adjustment unit is mounted on the crossover unit directly parallel to the woofer and enables to listener to adjust the output level between 70 Hz and 150 Hz. The lower-frequency bass is not affected. Increasing the resistance affects the bass output: 10 ohms for a minimal reduction in bass and 3.3 ohms for maximum reduction. If the adjuster is left open (i.e. resistance is infinite), bass output reduction is deactivated.

Technical Data:
Rated power	200 W
Maximum power	350 W
Nominal impedance Z	4 Ohm
Frequency response	28–40000 Hz
Mean sound pressure level	83 dB (1 W/1 m)
Cut-off frequency	200/4000 Hz
Principle of Housing	Bassreflex
Net volume	63 l + 4 l (ohne BR-Kanal/ without bass reflex channel)
Outer dimension height	1150 mm
Outer dimension width	235 mm
Outer dimension depth	400 mm